|
Commerical S-280 "Like" Electronic Equipment Shelters
Mechanical
Data and Features
- Exterior
- 147" L x 87" W x 86-3/8" H
- Interior
- 138" L x 81-1/2" W x 77-1/8" H
- Heat
transfer coefficient - U-Factor-0.38 BTU/hr/sq. ft./F
- Payload
- 5000 lbs - standard configuration.
- Water
tightness -completely water-tight; tested on rain making station.
- Operating
temp.-65F to +125F plus solar load. Non operating temp. -80F to +160.
- Mounting
member support loads - Wall, roof and floor tensile load of 1000 lbs. Followed
by 100 inch pounds torque load 5/16" - 18 insets.
- Latching
device - three point roller cam latching mechanism provides ease of personnel
door operation while maintaining weather integrity.
- Roof
load - snow and ice load of 75 lbs./sq.ft.
- Skids
- three full length replaceable shock absorbing type.
- Floor
load - strength to accept 2500 lbs. over any 3 sq.ft. area without permanent set.
- Roof access - three recessed folding steps in side
wall and one roof handhold.
- Panel Construction
bonded sandwich consisting of polyurethane foam core, aluminum skins and a framework
of high strength all welded aluminum alloy extrusions.
- Lifting
eyes - four (4) eyes with 3" inside clearence 14,400 lbs.tensile load per
corner in any direction.
- Towing eyes - four
(4) eyes with 2" inside clearance. 14,400 lbs.tensile load per corner in
any direction.
- Basic Shelter supplied with one HVAC
cutout size 19" x 27".
- Can be safely transported
by truck, aircraft, rail or ship.
S-280 Electronic
Shelter Options: - Power Panel Entries
- Signal
Panel Entries
- HVAC Cutouts (any size)
- Shock Skids
- EMI
Shielding
- Custom Paint
- Tapping Plates
- Masts
- Antennas
- Integration
- Custom
Sizes
- Leveling Jacks & Interior Jack Stowage
- Inclinometers
- Lifting
Sling
- Recessed Step Pockets
- Ventilation Openings & Louvers
- Cable
Entry Doors & Hood
|
